The Z-Corp Spectrum Z 510 is a powder-based 3-D printer. It features a typical X-Y axis but includes two Z axe. The Z bed to the left is full of powder which serves as source material for the print. Powder from this area is rolled onto the second Z printing bed area in even and […]
This 3D printable hot water jacket provide precise control over media temperature, enabling media to remain liquid without cooking embedded cells. Printed on an Objet in standard materials, the jacket can withstand temperatures up to 60C. It is printed in two pieces and epoxied together, metal or nylon hose barbs can be threaded into the […]
Syringe Printing with Plant Cells
BUGSS Lab Notes – 8/1/16 Analysis of Prints from the Previous Lab Session: Our tests on 7/20/16 showed that increasing print time enabled us to print smaller posts. Increasing print time to 10 sec/layer allowed us to print posts down to 150µm x 150µm in the x&y. Looking at these prints under the microscope to determine the […]
Join the community at 3pd.bio.